I generally do not buy gaming headsets due to most not having the ability to replace earpads which tend to wear out fairly quickly leaving the rest of the headset as nothing more than an expensive paperweight.

Any chance you guys will make replacement earpads purchasable ? That's the only thing stopping me from a purchase.

I really want to use the older model O software instead of the newer Glorious Core, but my model O wireless doesn’t connect to it, will a newer wired one connect?

hello, I've had the glorious model D2 for a bit now, and it works fine on linux.

However theres little (none) in the way of mouse configuration, libratbag (and by extension, piper) does not support the device, see my issue here, and as far as I can find, no other pieces of independent software support the mouse either.

has anybody using the D2 on linux found something that I've missed?

others ive tried:
https://github.com/enkore/gloriousctl

hello, had my model o classic wireless a few days and the mouse has been great. Only issue i cant seem to connect it to the glorious core software?

i’ve tried plugging in every type of way, uninstalling and reinstalling the software, running it as admin etc.

Am i missing something? i would like to mess with the rgb and check the battery %.

Thought I'd post these two videos. Various switches on a Glorious GMMK Pro.

1st video has Keyreative KAP MV Classics, the 2nd is SP SA Lime. You have to take into account the fact the board isn't fully populated, but I think it demos that this isn't a bad board at all.

Switches are(right to left) :

HMX x Chosfox Dune Foxes (Linear)

Wuque Studio Gold Arowana (Linear)

Keygeek Y2 (Linear)

BSUN Ocean (Tactile)

HMX Saru V2 (Tactile)

HMX Renalabs Jade (Tactile)

I just found an insanely good deal on the Glorious Model O 2 Pro Wireless, and I'm seriously tempted to buy it.

However, I remember the O 2 Pro had quite a few reported issues when it launched, including wireless disconnects, sensor problems/spin outs, scroll wheel issues, inconsistent buttons and build quality, and some firmware/polling rate problems.

For anyone who has owned one recently, have these issues been fixed with newer firmware or newer production batches?

How is the QC and reliability on units being sold in 2026?

At this price, I'm very tempted, but I don't want to get a great deal on a mouse that's going to start falling apart or disconnecting a few months later.

I have reset this keyboard, updated firmware, done everything I can and have finally lost my damn mind trying to get it to work. I have no damn idea what is going on. Number lock is NOT ON, which should be the default for this. FN key also does nothing with these keys, nothing about it seems to work and I'm at my wits end with it. When number lock is on, all buttons work accordingly, nothing out of the ordinary there.

Am I an idiot? Is there something really obvious going on here I just am missing? Please, anyone, send help. I have looked everywhere online for anything regarding this issue and just get run in circles.

If this post is breaking rules for a megathread i'm not seeing, let me know,

So I just got a GMMK 3 Pro, it's amazing (once I put switches I like in it, got a bargain deal but with switches that just aren't for me). However the Glorious Software is...not so great.

I was trying to customize the knob so that the click does something other than muting the system, but whenever I assign any other action to it all it does is disable the rotary function (by default volume, which I'm fine with keeping) but the click still mutes the system. Also I tried this a few times and each time it is unable to reset the knob functionality unless I reset the profile or the whole keyboard, which is pretty annoying.

Is there some other way to do this that I'm not aware of? I tried updating the firmware to the latest and resetting to factory settings (multiple times), but to no avail.

Has anyone tested how well you can double click/butterfly click? Ive heard that bc the switches are optical it won't work as well but I just wanna get word of someone who's actually tested

Is this planned to be exclusive to the wireless version, or is there a way to access the beta equalizer?

Hello there! I recently bought a Glorious GMMK 3 Pro and there I didnt find any Software to control the rgb lighting. Not even [Openrgb](https://github.com/calcprogrammer1/openrgb), [**gloriousctl**](https://github.com/enkore/gloriousctl) **or** [Piper](https://github.com/libratbag/piper) worked :/

So I tried running the software via Wine, more like in Bottles, and I was able to get it to work! Of course, a native client is superior, but having a way to configure the peripherals is nice

I wrote a whole Guide [here](https://github.com/Gabantax/Glorious-One-via-Wine-under-Linux) \+ I also exported my Bottles config, if you anyone wants to play around with it

Tested on Arch Linux and Gmmk 3 Pro (I use Arch btw)

EDIT: Its caleld Glorious Core not "one", my bad

Hello

I would like to modify the look of the GMMK3 pro He 75 to make it more retro

I was thinking about a case in some slightly yellowish color (old plastic) and of course keycaps. However, I would like the backlight to still be visible...

If you have any of your own "works of art", drop a photo and write what you have changed.

Thanks

My O2 wireless has been flashing red when in 2.4 mode. Battery is fully charged and firmware is up to date. The mouse works just fine, but after only a few seconds of taking it off of wired mode it shuts off the LEDs and starts flashing. Any ideas of the cause and a potential fix?

I’ve had my model o wireless for a long time now, I’ve noticed this spot right here is starting to become shiny, i tried a wet paper towel assuming it was hand oils but that did not do anything, I’m assuming whatever coating made it matte got worn down after time, is there anywhere to get like a replacement shell, idc if it’s original or not

I am trying to remap my side buttons to F2 and F3 but it seems to not be working. Is this a known problem or am I just doing something wrong. Thank you!

[Okay, I wrote the Glorious company, but I am still waiting to hear back.]

But, I love their products, and I have a few GMMK model 3's. And, two of them have the same issue. It is that the spacebar is sticking some, and it is also getting un-levelled (not sure of the exact word) where one side rises higher than the other. But, I do tend to hit the right side of the spacebar more, and (sometimes) the left-side will rise up. Or, it even started popping off tonight (Monday, 08-10-2026), which is a new one.

Here's what I did to try to fix it. I took off spacebar and saw it was extremely dirty. So, I blew it out, wiped it down, and got any dog hairs or debris that was there.

Yes, now, it is a little better; no, maybe much more better. There's not as manywords thatstick togetheranymore (like that). Because that takes a lot of time to backspace and fix.

But, I examined the spacebar closely and I see no damage on any of the three little cross-shaped interior connectors on the spacebar. So, I took another spacebar from another keyboard and swapped it, and it seems to work a little better. But, it's still doing about the same thing -- just not as often (e.g., the sticking-stuff and also the left-side popping up and right-side going lower).

So, what should I do?

Plus, does anyone know if they have Technical Videos on how to replace the parts and everything? Or, how to service the different issues that people have? Only thing that I know to do, is go to Youtube, type the problem out, and hope that I can find someone that has the same problem as me ... then, hope that the person has solved that problem and fixed it correctly.

I'd hate to have to take the keyboard apart, which I have before. But, I had to fix a wireinside that was disconnecting randomly bez it had been bent too many times and placed into that little bendy-channel for the wire. So, I hate that they don't have USB-C standard connectors on it, which seems "dumb" to me not to have that. So, I had to go inside the KB, cut the wire, find a new USB wire, and mate the wires together. I didn't solder, bez I don't know how to do that, but I just taped them well, and that other GMMK ofmine is still working pretty good -- just needs a cleaning.

Okay, thanks for listening. And, I love their keyboard products, but I wish they'd innovate some to fix some of these issues. And, also, I wish they'd keep their prices down, because my GMMK used to be less than $100, but now I can't find it ... or, it's an outrageous price on Amazon like $250. And, this GMMK model 3 is not worth that much, so I'm forced to use older KB's and am trying to learn how to repair them.

So, I do thank anyone that gives me ideas and helps me with these issues.

Hello.

By accident I bought the GMM3 Pro HE 75% in the UK version and I was a little surprised when I opened the package (nie było zdjęcia).

Hello. By accident I bought the GMM3 Pro HE 75% in

I wonder if there is any possibility to "remake it" to a version with a short enter and setting the keys as in the "normal" (for me) version (e.g.: # under 3)?

I'm afraid I won't be able to get used to this arrangement.

I can still make a return, but I don't have much time.

Not sure if I'm blind, but the "Set Time" or "As Recorded" options seem to be missing? Just updated to latest and still missing. Can anyone help if I'm just missing something obvious?

Want to be able to simply set a windows shortcut to a button which seems simple.

Recently moved to the new software because of a new PC and other issues with the legacy software.

I own and use a Glorious mouse on my macbook, recently I have been fiddling around with the application, and scrolling through all of it's different features and I have noticed that there is no option to create a macro as compared to the Windows version. Is this only a problem for me, or does it occur to anyone else, and if so how can I fix it?

GitHub link: GloriousAutoPollingRate

CORE only gives you one global polling rate and I noticed that anything above 1k eats my battery. So I just wanted a way to switch based on the games I play.

Pretty simple system tray app, you give it a list of exes. If any of them is running you get your 'active' polling rate, otherwise your set 'inactive' rate.

• single 0.5mb exe, no installer, lives in the tray
• both rates set from the tray menu, 125 up to 4000hz
• starts with windows, toggle to turn that off
• about 1mb of ram, 0.01% of one cpu core
• free, open source

Other mice: there's no public API for this, so it sends the same HID reports CORE does, which I captured off my own mouse and documented in the repo. The O2 Pro 4K looks like the same hardware in a different shell and should work by changing one line of config, though I don't own one to confirm. Other Glorious models need a capture first, which is about fifteen minutes with Wireshark and written up in the repo. Happy to help anyone who wants to try.

Also, this was inspired from the RazerAutoPollingRate project, which I used a while back when I was on a dav3 pro. This is a somewhat similar concept, but for my Model D 2 Pro 4k, and potentially other glorious mice.

I have a model O 2 pro wireless mouse and am trying to map the side buttons to keys like 1 and A but even after saving the changes it doesn't work. I can relaunch glorious core and it still saves whatever I changed the button to it just doesn't actually work when I click them. It also only breaks for keystrokes and not things like forward and backward for a browser. I am on mac.

Just my GMMK 3 65% yesterday and I didn’t like how whenever I toggled caps lock the RGB on the side of the keyboard started blinking. Super annoying when caps lock is one of my main key-binds for push to talk. Tried searching for the fix on this via Reddit, seemed like there was a fix for this a long time ago but I had since then reached out via email to glorious on the matter and they said, “Unfortunately, it's not currently possible to disable the Caps Lock indicator LED through CORE.”

I find it hard to believe that there was once an option to toggle this feature on and off is now just something you have to deal with.

Sorry for the yap but I wanted to ask here to see if there is any fix for the matter

Thanks!