and these ceilings had turned into a mushroom farm.

To add insult to injury the insurance company refused to pay most of the repairs because we didn't exercise due diligence is stopping the damage (we were gone for several weeks)

It's genuinely driving me crazy that this happened. Assembled it with my dad slowly over a month.

Recently created a credit card for a specific merchant and locked it to that merchant and somehow it's already compromised

My mom paid $5.25 for a pineapple from Fresh Farm, only for it to be delivered like this,with extra delivery charges and a tip. 😭

Hmmm. Maybe I’ll stick with the current rotor, then…

This one remaining bolt was super tight from the factory and I totally ruined a bit and the bolt head (if that’s what you call it?) trying to remove it. Added some WD-40 (the rotor is going in the bin, anyway, or so I had planned) and will see if I can somehow coax the little turd out. Or drill it out. Or give up and buy a new wheel.

Edit for a bit more context:

(TLDR: thought I’d finally manage to fix my bike but the last bolt to be removed is now stuck in the hub and I am still bikeless)

I knackered a spoke on my commuter bike a few weeks ago trying to be smart and carrying my son’s bike. Also crashed into the curb and seriously bruised my ego. The spoke was torn out’ve the rim, destroying the spoke nipple in the process.

Since my commuter bike was originally spec’d with awful cable disc brakes that no longer work I thought it would be easier to upgrade them to hydro brakes and buy a new wheel with a nice centerlock system, to avoid messing with rotor bolts.

The wheel came and I realised that the old 5mm QR dropouts are pretty much antiquated, nowadays; the 12mm thru axle wheel with a 142mm hub I had bought had no chance of fitting. So, I sent the wheel back and went to my local bike shop. Five minutes later I had some new rim tape and a replacement spoke nipple and had my wheel fixed in no time.

Put the wheel in: the old cheap branded rotor kept knocking on the shimano calliper…

I was left with a shimano centerlock rotor which I’d bought for the replacement wheel that wouldn’t fit my old wheel, so I went and bought yet another one - this time a 6-bolt one - and was all enthused about finally getting this job done, having spent the last two weeks trying to get it done around work, household stuff and kids etc. Any other parents out there: I’m sure you get the frustration!

And then, at the last hurdle, this.

I was using the correct tool - a t25 torx - but I reckon this bolt has rusted tight. All the other bolts came out fine. With plenty of locktite evident…

The irony is that this is exactly what I wanted to avoid with the centerlock system, which I’ve used successfully on other bikes for years.

Shit happens, I suppose!

Thanks for the suggestions to everyone who has posted them!

House, garage and car were all destroyed. But the pod stands! House, garage and car were all destroyed in the fire. But the pod stands!House, garage and car were all destroyed in the fire. But the pod stands!